Category Archives: Site Updates

Radium Engineering Catch Can Kit for the Evo X

We are please to add another brand to the brands we offer, this is Radium Engineering and we are starting with the catch can kits for the Evo X 
RE catch can kit for the evo x

Radium Engineering now offers two completely independent oil catch can kits for the Evo X that are sold individually or together based on customer needs. These catch can kits do NOT vent to atmosphere (VTA), thus are emissions and track legal. Closed loop systems route clean filtered air back in through the engine to be burned and to promote negative crankcase pressure for optimal performance. Furthermore, closed systems prevent unwanted oil vapors into the cabin. The Radium Engineering catch can kit for Evo X is one of the highest quality on the market today.


PCV Catch Can Kit 

PCV catch can kit for the evo x

The PCV Catch Can Kit for the EVO X is compatible with all 2008-up EVO X models. It installs immediately behind the RH headlight and plumbs in-line with the PCV hose. When the intake manifold pressure is close to or greater than atmospheric pressure, the PCV “check” valve closes and, thus, this hose experiences no flow. Conversely, the PCV hose will experience “metered” vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw unwanted crankcase vapor, unspent fuel, and oil sludge into the intake manifold immediately after a high load run. 

Note: Because the Radium catch cans are pressure sealed, they are great for boosted applications as well so connecting to the intake manifold is permitted and will withstand any boost level. 

PCV Kit Includes: 

-Radium billet oil catch can kit for the EVO X with integrated condenser and dipstick 
-Radium laser cut powder coated application specific mounting bracket 
-Anodized aluminum hose ends and adapter fittings 
-Rubber hose to mate to custom applications 
-Stainless steel mounting hardware 


Crankcase Catch Can Kit for the EVO X 

Crankcase catch can kit for the evo x


The Crankcase Catch Can Kit for the EVO X installs immediately behind the LH headlight and plumbs in-line with the crankcase vent hose. This is the hose that connects from the port on the valve cover to the turbo air intake pipe. On 2008-2009 EVO X models which use the “metal” valve cover, the hose is 3/8″ (10mm) and requires P/N 20-0106-08. On 2010+ EVO X models which use the “plastic” valve cover, the hose is 1/2″ (13mm) and requires P/N 20-0106-10. During low engine loads, this hose experiences atmospheric pressure, but when the engine is at high load (WOT), this hose will experience vacuum and would normally be drawing unwanted crankcase vapors, unspent fuel, and oil sludge into the air filter intake pipe, turbocharger compressor, etc. For instance. if you are finding oil accumulation stuck in the intercooler, this catch can is a necessity as oil will lower the thermal efficiency properties of the heat exchange process. 

Crankcase Kit Includes: 

-Radium billet oil catch can kit for the EVO X with integrated condenser and dipstick 
-Radium laser cut powder coated application specific mounting bracket 
-Anodized aluminum hose ends and adapter fittings 
-Rubber hose to mate to custom applications 
-Stainless steel mounting hardware 

BUY THEM TODAY

 PCV CATCH CAN KIT FOR THE EVO X

CRANKCASE CATCH CAN  KIT FOR THE EVO X

PCV AND CRANKCASE CATCH CAN KIT FOR THE EVO X COMBO

Kronos Performance now has a new website! Check it out!

Well, we have been working very hard for the past week to get our new site up and working for our customer base. We took your feedback about having it being cumbersome to navigate the old site and there were limitations to our old shopping cart platform that we wanted to do for our customers but we just plain couldn’t. It became more apparent that we needed to make a change….so we did.

We are now on a new shopping cart platform with a new look and feel to the website. I personally feel that it looks more professional and it is directly catering torwards your car platform, rather than you rummaging through a bunch of categories to find your car. No more tricky hover over.

Some new features:

– Compare Products
– Wishlist (although the old site had it, this one is more useful)
– Easier Navigation
– Ad to Cart for Special Prices on Certain Items

and much more to come in the future. This is just the starting point.

If you have an account on our site, your login info should still work. If it doesn’t, reset your password and you should be able to login no problem.

Let me know what you think!

– Adam