Eibach Pro-Kit : 2015 Subaru WRX
Eibach has just released their Pro-Kit lowering springs for the 2015+ Subaru WRX. The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It’s their legendary spring system that dramatically improves both a vehicle’s performance and appearance.
These springs lower your WRX’ center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro- Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.
Every Eibach Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.
Eibach Pro-Kit 2015 Subaru WRX: Features and Benefits
-High Performance Handling and Aggressive Good Looks
-Lower Center of Gravity — Lowers WRX 0.8″ Front and 0.8″ Rear
-Stop Quicker, Corner Faster and get Better MPG
-Excellent Ride Quality
-Million Mile Warranty
Eibach Pro-Kit 2015 Subaru WRX: Technical Information
OE rate: 38 N/mm (217 lbs/in)
PRO-KIT progressive rate: 28 – 64 N/mm (160 – 331 lbs/in)
OE wheel center to fender: 372 mm (14.6 in)
PRO-KIT wheel center to fender: 350 mm (13.8 in)
PRO-KIT can be aligned to OE Specs: Yes
OE rate: 54 N/mm (308 lbs/in)
PRO-KIT progressive rate: 45 – 60 N/mm (257 – 343 lbs/in)
OE wheel center to fender: 369 mm (14.5 in)
PRO-KIT wheel center to fender: 345 mm (13.7 in)
PRO-KIT can be aligned to OE specs: Yes
The Eibach Pro Kit for the 2015 WRX is the best bang for your buck when trying to lower your WRX and you can get it from us today!
Eibach pro kit 2015 Subaru WRX
Cusco Rear Cross bar 2015 WRX and STI
Cusco has released their rear cross bar for the 2015 WRX/STI. The Cusco Rear Cross bar for the 2015 WRX and STI ties the rear strut towers to the chassis for additional rigidity for better handling and response. The cross bar is constructed of aluminum for weight savings and stiffness and coated with Cusco’s blue finish. The 4 point bolt-in brace is fitted in the trunk and adds rigidity to the chassis, increase in response can be had with this brace and only basic hand tools are required for installation
You can get your Cusco rear cross bar: 2015 WRX/STI right here at Kronos Performance
Mishimoto Performance Air Intake: 2015 WRX
Mishimoto has developed a great new performance air intake 2015 WRX its engineered specifically. The intake features numerous innovative components, including a wire-reinforced lower induction hose that will not collapse under suction and boost. Dyno testing showed maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs on the stock tune. Dyno testing also yielded results of up to 70 whp with the Mishimoto tune kit and intake with 93 octane fuel while maintaining safe AFRs (see additional images for dyno chart). This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds.
Mishimoto Performance Air Intake 2015 WRX DYNO
The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake is optionally available with an enclosed airbox for protection against engine bay heat-soak, and it provides a stock-like engine bay appearance as well. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. Made in the USA and available with either polished or wrinkle black aluminum intake piping, this kit includes the Mishimoto Lifetime Warranty is included with the Mishimoto Performance Air Intake 2015 WRX.
Mishimoto High-Performance Intake 2015 WRX Features and Benefits:
-Direct fit for the 2015+ Subaru WRX
-Dyno-proven maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs on the stock tune
-Dyno-proven gains of up to 70 whp and 70 wtq with custom tuning and intake using 93 octane fuel while maintaining safe AFRs (see additional images for dyno chart)
-Extremely aggressive intake tone under acceleration and boost
-Optional airbox inclusion retains stock-like engine bay appearance
-Functions with the stock intake duct which supplies cold air to intake filter
-High-flow oiled air filter provides increased filtration surface area
-Wire-reinforced silicone hose prevents collapse
-Easy installation can be completed in one hour
-Made in the USA
-Available with a polished or wrinkle black pipe finish
-Mishimoto Lifetime Warranty
Application: 2015 Subaru WRX
Mishimoto Performance Air Intake 2015 WRX
Skunk2 Subaru WRX/STI Throttle Body
2004 – 2007 Subaru STi
2006 – 2007 Subaru WRX
Skunk2 introduces its 72mm Pro Series Throttle Body for the ’06-’07 WRX and ’04-’07 STi in a signature, Black Series finish. Skunk2’s Pro Series Throttle Bodies are designed to be used with the OEM intake manifold for bolt-on horsepower and torque gains by optimizing engine airflow. This makes the Skunk2 Subaru WRX Throttle Body ideal for any high performance STI or WRX
Skunk2 Subaru WRX/STI Throttle Body undergos an extensive design and testing process to produce a throttle body that doesn’t just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series TB is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2’s signature finish. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and a genuine, integrated Skunk2 badge. All necessary hardware and a new TB gasket are included for trouble-free installation.
A larger throttle body is key to producing additional power throughout the power band on modified engines with increased airflow demands. Skunk2’s Pro Series Throttle Bodies for the WRX feature a 72mm bore, which results in significant horsepower gains throughout the power band.
Click Here to get your Skunk2 Subaru WRX/STI Throttle Body today!
License plates are a necessary evil on the front of our cars, but you can save your front bumper from looking boring or blocking flow to your FMIC with the GrimmSpeed 2015 Subaru WRX/STI License Plate Relocation Kit . Utilizing their unique Infinite-Adjust design allows for virtually any mounting position and angular adjustment so you can mount it where you want it! This simple design mounts in the OEM tow hook location for maximum support while providing you with the largest range of adjustment available on the market. With laser cut and powder coated 5052 Aluminum, this bracket will hold your plate confidently in place while looking sharp and light. Each tow hook adapter is custom designed and CNC machined from 12L14 and then treated with black zinc for an indestructible and perfect fit.
Features and Benefits
– Most adjustability available on the market
– Mounts in OEM tow hook location (No cutting or drilling required)
– Simple stainless steel allen key hardware
– Will not block flow to your FMIC and can be adjusted to not block fog lights
– Adjustments available for maximum air flow)
– Indestructible Black Zinc coated 12L14 shaft
– (This will not bind and break off in your tow hook hole like cheap aluminum kits)
Get Your High Quality GrimmSpeed 2015 Subaru WRX/STI License Plate Relocation Kit Today!